feedburner
Enter your email address:

Delivered by FeedBurner

feedburner count
Showing posts with label Industry News and Analysis. Show all posts
Showing posts with label Industry News and Analysis. Show all posts

Dome sweet dome - luxury ‘Tent’ from a recycled compound

Labels:

Each year thousands of tents are abandoned at festivals and end up in landfill but accommodation at these events could be about to go green.

Moulder JSC Rotational based in Worcestershire, the UK, has made a luxury ‘tent’ from a recycled compound developed by compounding and recycling firm Luxus.

Myhub is made from recycled plastics and waterproof cardboard and features a foam double bed while the base and end frames are moulded in 100% recycled MDPE.

If the idea catches on Luxus in Lincolnshire, the UK, hopes to introduce a “closed loop system” where the used myhub plastic parts are reclaimed and reused to produce more myhabs.



Plastic comes to flipper's rescue - Amphibian swim fin

Labels:

This story begins with a lost dog, and ends up in deep water. In between, there is collaboration between a diver with an idea for a better swim fin, the designers who brought his idea to life and materials suppliers who found the right resin blends to make it all work.

And there is also a bronze-level honor in the International Design Excellence Awards for the product they brought to the market: Omega Aquatics’ Amphibian swim fin with a blade that moves out of the way to make life easier for divers before they even enter the water. (The IDEAs are annual honors from the Industrial Designers Society of America.)

Fin creator Ronen Moyal, an avid diver, came up with a concept for a swim fin in which the blade would pop up and away from the foot bed.

The idea was to make it easier for divers to walk on the beach or a boat deck with the fins on, while getting ready to enter the water. But though he had gotten as far as putting his concept into computer-aided-design files, he did not know where to go next.

Enter the lost dog.

One afternoon, one of the workers at Designcraft Inc’s offices in Lake Zurich, Illinois, found a dog wandering in the business park, took it in and started looking for the owner.

The dog belonged to Moyal’s wife, who had another business in the park, and who mentioned that her husband had an idea for a new product, said designer Casey Stahl in a 13 September interview at the IDSA´s annual conference in Phoenix.

The diver and the designers hooked up, and Designcraft quickly saw the potential of Moyal’s concept.

“He’d been kicking the idea for a while, and when we saw it, it was almost one of those, ‘Why didn’t we think of this?’ projects,” Stahl said.

Walking with fins is awkward. Putting them on when the diver is already loaded down with scuba tanks and a weight belt can be dangerous, he said. Pulling them on in the water wastes time.

The Amphibian is designed so the diver can put them on right away, move comfortably on land, and swim away quickly once he enters the water, with the flexible motion of the fin itself pushing the blade into place.

Through the two-year development, the companies faced two major issues, Stahl said - which materials to use, and the mechanics of getting the fin to flip up out of the way when on land, but pop into use easily in the water.

Material choices were limited, as the fin and its movable parts needed to be able to stand up to salt water and the cold of a subarctic dive, but also move easily in the water.

The final product relies on two small stainless-steel springs on either side of the fin, and a polypropylene hinge molded into the PP substrate structure. The PP hinge also can be pushed down to release the blade with the heel of the other foot, which makes it easier to move the blade out of the way and climb a boat ladder at the end of a swim.

GLS Corp of McHenry, Illinois, was brought in to provide the right thermoplastic elastomer to add flexibility to the structure, with the companies taking advantage of the chemical bond of a TPE overmoulding on the PP substrate.

“It needs to be both flexible and robust,” Stahl said.

The fin uses two blends of GLS’ Dynaflex TPE to tweak the flexibility where it’s needed to give the fin the best possible performance in the water, said Dyana Hunsaker, GLS sales representative. The Amphibian also uses GLS TPE on the sole of the foot bed, to give more secure footing on slippery surfaces.

“Initially we called in GLS to help us on the bonding issue, but they helped us troubleshoot when we were running into problems in processing,” Stahl said. “We were able to find where we’d designed the PP a little too thin for what we needed in moulding.”

The Amphibian hit the market in late 2007, and Omega and its partners are working on future projects now, including a military-grade version, he said.

* Rhoda Miel is a journalist at Plastics News, a sister title of PRW and EPN



Injection moulded photovoltaic roof tiles - Ready to hit the market

Labels:

By the summer of 2009, consumers can expect to see plastic photovoltaic roof tiles on the market. The product will feature an injection moulded tile with a compression laminated photovoltaic layer.

Getting the tiles to market hasn’t been easy. Peter Bressler, founder and principal of Bresslergroup, a Philadelphia-based industrial design and product development firm, explained how he did it in this video report. He is speaking at the Industrial Designers Society of America’s recent national conference in Phoenix.

PRW's sister title Plastics News is teaming up with the 3,500-member IDSA to deliver a series of videos from the event.

PN reporters interviewed students, educators, inventors and design/innovation leaders from such firms as Lenovo, Nike, Dell, Navistar, HP, Bayer, GLS, Hong Kong Polytechnic and many more.

The series is called “Design Briefs: An original video series on collaboration, education, sustainability, China & more.” The interview with Bressler is the first in the series. Watch for at least 12 video clips, to be released one per week, on the IDSA.org and Plastics News Global Group Web sites.



E-screen project to bring colour to new technology

Labels:


A £12m project to develop the technology that will eventually allow e-readers to display in colour has been launched by Liquavista and Plastic Logic.

The three year research programme will allow the two companies to develop next generation flexible electronic displays using Liquavista’s patented electrowetting technology.

Applications could include e-magazines, watches, phones, secondary displays on laptops, and consumer or medical devices with an electronic display.

Liquavista, a spin-out company of Philips Research Labs, is expanding its scientific and engineering team in Cambridge by recruiting 15 technical and five commercial staff members.

It launched its first display platform using its electrowetting technology earlier this month, aimed at watches and mobile phone secondary displays.

Liquavista vp marketing and sales, Simon Jones, told PRW.com: “It’s great news for the UK. It’s showing we have the continued ability to create these leading technologies, and build and maintain a national competence in plastic electronics and display.”

The research will be partially funded by the government sponsored Technology Strategy Board.

“There will be some commercialisation phase after, and possibly parallel, with the back end of the development project,” Jones added. “It’s not going to be one big leap because there will be simple flexible displays first and then gradually more complex displays.”

An image is formed on an electrowetting display when a voltage is applied to a coloured oil – this makes the oil contract. The technology will create thin, flexible and light screens that display bright, colourful images and show video content with low power consumption.

More than 90% of the manufacturing cycle uses standard LCD manufacturing equipment and processes.

The majority of Liquavista’s next generation display research is currently carried out in its Eindhoven facility in The Netherlands. The company has 60 staff worldwide – this number does not include the new hires.

The new jobs would be split between the company’s office in Abbotsley, outside Cambridge, and Plastic Logic’s Cambridge offices.

The displays will initially use plastic substrates as the carrier for the TFT backplane. Jones said there could be a plastic backplane on products within two to three years.

“It’s the subject of active development,” he said.

“Some of the research from [the Plastic Logic joint project] and some of our own research independent of that project will together help to develop [a plastic backplane].”



DuPont unveils auto breakthrough

Labels:

DuPont has developed the first oil pan module for serial vehicle manufacture which will be used on Daimler’s 4 cylinder diesel engines, initially on the Mercedes C Class.

The company highlighted the engineering polymer breakthrough, for its Zytel 70G35 HSLR nylon, at this week’s Fakuma show. The 6 litre capacity oil pan comprises a die cast aluminium upper shell and multi functional lower shell made from the nylon.

The component, moulded by automotive supplier Bruss, offers a 1.1 kg weight saving over an entirely aluminium design and offers scope for further functional integration in future.

The pan involves a sophisticated sandwich design with a second injection moulded part welded onto the pan’s flat section. This design helps to calm the oil churned by the crankshaft while high ribs in the sump, which act as baffles, also help to achieve this calming.

The project involved close cooperation between DuPont and the moulder with finite element analysis techniques used to refine positioning of the ribbing, improving the stiffness of the critical flat section of the plan.

Flow studies carried out by DuPont showed the impact of wall thickness, gate number and positioning and weld line formation and warpage behaviour.

In fact, DuPont noted, the high flow rate of the Zytel enables one single gate to fill the mould cavity completely, resulting in reduced tooling costs and simplified process control.

Tests at DuPont’s technical centre at Geneva involved the combined engine and transmission “being dropped forcefully by a fork lift truck”. Real life tests at Bruss also confirmed the performance of the polymer-based component.



Hekro PET to produce new barrier food film

Labels:

Ukrainian packaging producer Hekro PET is reported to be preparing to manufacture a new barrier food packaging film by the end of this year.

Hekro is based in Khmelnitsky, Ukraine, and is a specialist in PET bottle preforms and polyethylene stretch film.

The company was planning to launch its new barrier film - claimed to be the first such product produced in the Ukraine - next month, according to Ukrainian investment company Alfa Capital.

The former Soviet country currently imports all barrier film for use in wrapping meat and other fresh food from Western European countries.

Alfa Capital believed Hekro will benefit from being the Ukraine's first domestic manufacturer of barrier flexible packaging. It is unlikely to be challenged immediately by other local film producers because of the higher technology required for such a development, the investment firm predicted.

In 2006, Hekro installed a high speed 5-layer cast stretch film line supplied by Battenfeld Gloucester Europe GmbH.

The Ukrainian firm is a leading bottle preform producer employing Husky injection moulding machines. It is a major supplier to the Ukraine's beverage sector.



New services from Hales

Labels:

Hales Tool & Die, the Maldon-based supplier of components to mouldmakers and injection moulders, has started some new services and launched a new website.

The company is now able to purchase mould hose by the metre, and supply with crimped ends, fittings and coupling to suit specific requirements of customers. This is a free in-house assembly service offered by Hales and the company says it is one of many initiatives designed to benefit its customers.

Hales is also now supplying ejectors ground to the customer's required finished length. The company said: "We take a standard length ejector from our vast stock and cut it to any length that the customer needs."

It uses a special in-house machine to supply ejectors cut to a tolerance of -0/+0.05mm. As well as offering DIN standard ejector pins, Hales also cover a wide range of ejectors including sleeves, blades and stepped pins, plus special ejectors made to order.

The company's new website at www.halesmastip.co.uk has easier navigation, a download section and an online catalogue. The website and the company's Global Strength, Local Knowledge initiative, first seen at PDM 08, reflects its position as a worldwide supplier to the industry with an image that reflects on the company's Australian roots, it said.



BPF launches Plastipedia and plastics ‘Facebook’

Labels:

The British Plastics Federation has launched its new website this week featuring an industry ‘facebook’ plus an exciting new tool called Plastipedia – an on-line plastics encyclopedia.

The website takes the industry into the plastics equivalent of social networking. Plastbook will facilitate exchange of experience between personnel in the industry.

It will also provide a facility to ask and provide answers to particular questions which could lead to business development opportunities for the respondents, said the BPF.

Public and industrial affairs director Philip Law described Plastipedia as “the world’s largest on-line plastics encyclopedia”. The tool covers polymers, additives, processing technologies and products and will feature animations of processes.

Other features include an Exporters’ Toolbox, with plastics market data for 80 countries, and an Industry Directory, containing profiles on some 2,000 UK plastics companies.

“The site has been entirely re-styled,” Law added. “Major new additions include downloadable buyers’ guides to the major players in the industry. Featuring BPF members they represent a tangible, new, membership benefit.”

The BPF's earlier website was already very popular with 1.5 million unique visitors per annum. The BPF website is at www.bpf.co.uk



Plastic recycling rates must improve, says EU

Labels:

Despite recent collapses in waste plastic market supplies, the European Union (EU) Council of Ministers has authorised increases in waste plastics that must be collected and prepared for recycling across the EU.

A new waste management framework directive has been approved boosting minimum recycling rates for plastics and other household wastes, saying that by 2020, the EU’s 27 member states must recycle half (by weight) of this refuse.

The same potentially applies to industrial plastic waste as well, where municipal waste collection is used by companies and “these waste streams are similar to waste from households”, said the legislation.

Also, by 2015 separate waste collection systems must be established for plastics waste, along with paper, metal and glass. Welcoming the legislation, a council communiqué said: “By promoting the use of waste as a secondary resource, the new legislation aims to reduce landfill and greenhouse gas emissions in landfills”.

It also lists compulsory priorities for waste management within national programmes and policies as follows: waste prevention (the preferred option); re-use; recycling materials; recovery (including energy recovery), and safe disposal (only to be used as a last resort), potentially pushing even more plastic into a recycling stream, whose market is currently in deep trouble through mass exports to China ending.



Evidence confirms BPA 'is safe’, says PlasticsEurope

Labels:

Governments across the globe agree that BPA is safe in the current allowed levels despite the concerns that have emerged from the US this week.

Trade body PlasticsEurope made this argument to head off a panic after the evidence used by the US government on BPA safety was judged “inadequate” (PRW.com 30 October).

PlasticsEurope said BPA safety was “of the highest concern” for its PC/BPA Group and that the group would continue to comply with Europe’s regulatory authorities.

However, the trade body added that in Europe BPA had one of the most “rigorous” and “conclusive” safety examinations of any substance. It said the updated European Union Risk Assessment published in June found that BPA was safe for its intended uses.

It said that this assessment involved government experts considering several hundreds of studies including both small exploratory and comprehensive, statistically-robust studies.

The trade body added that the European Food Safety Authority (EFSA) revisited BPA safety in a report published in July and confirmed the safety of existing food contact applications.

PlasticsEurope added that the EFSA has now assessed the American Medical Association (JAMA) report. It issued a statement last Friday saying that the JAMA report provided no grounds to revise the current allowed BPA levels.



Vehicle emission rules increases use of plastics

Labels:

The high cost of oil is hitting motorists hard in the pocket. But carmakers are looking at fuel economy from a very different perspective – regulators within both Europe and the US are tabling tough new laws designed to curb CO2 emissions.

The EC has drafted legislation aimed at reducing average fleet CO2 emissions from new passenger cars from today’s level of 160g/km to 130g/km by 2012, a reduction of 19%. In the US, regulators are looking for a 4.5% improvement in Corporate Average Fuel Efficiency (CAFE) performance each year until 2015, when it wants to see passenger cars averaging 35.7mpg (15.2km/l).

Achieving these targets will require a whole raft of new technologies, but one weapon in the armoury will be a renewed focus on weight reduction. And plastics will play a key part.

One of the key challenges will be to reverse the trend for cars to grow with each generation. Jean-Claude Steinmetz, vice president for the automotive and transport market at Rhodia points out that average vehicle weight increased over the period from 1995-2005 period from 1,100kg to 1,300kg.

More specifically, he says the first Volkswagen Golf weighed 750kg. Today’s Golf weighs 1,400kg. “36% of emissions are due to weight. If 20% weight can be saved, it means 10-12g/km less CO2 emission,” he says.

Steinmetz believes a greater use of plastics could still cut around 35kg from vehicle exterior parts, 22kg from the engine compartment, and 63kg off the structure of a vehicle.

Expanded PP foam producer JSP also emphasises the emissions saving potential of plastics. It claims that the use of its foams in seating systems, for instance, can reduce weight by up to 35% – or 10kg per car.

“A 10 kg weight saving in a car that sells over 100,000 units annually and has a kerb weight of 1,200 kg is the equivalent of reducing the environmental impact of its production by over 800 cars a year,” says JSP Europe chief operating officer Paul Compton. “On an average car that’s a reduction of over 20,000 tonnes of CO2 annually.”

A review of sustainability carried out by Johnson Controls Interiors also underlines the critical role of weight reduction. It calculates that 77% of green house gases (GHG) occur during the usage phase of a vehicle, with fuel extraction, processing and distribution accounting for 11%, manufacturing 9.5%, resource extraction and transportation 3.4%, and end-of-life disposal 0.13%.

Faurecia’s CEO for automotive parts Yann Delabriere told EPN sister magazine Automotive News Europe that weight reduction is now a top priority. “We have been discussing weight for years, but not with the same cost consciousness,” he says.

Faurecia’s product portfolio – seating, cockpits, bumpers and exhaust systems – accounts for around 16% of the weight of a typical vehicle, so scope for it to influence vehicle weight is huge. “If we account for 16% of the weight of a car and the car weighs 1.2 tonnes, then our products represent about 190kg. If we reduce this by up to 20%, that means about 38kg,” he says.

Plastics headlamps and body panels have been a key contributor to weight reduction over the past decade– while also improving design flexibility. That combination of benefits is now ready to transfer to the vehicle’s glazing.

Sabic Innovative Plastics European automotive market director Derek Buckmaster estimates that replacing the side and rear glass on all the passenger vehicles on the road in Europe today with PC alternatives could reduce fuel consumption by around 2,100m litres a year and CO2 emissions by around 5.2m tonnes.

And US envirommental strategy group GreenOrder calculated that the Qarmaq concept SUV developed by Sabic IP together with Hyundai to showcase the potential of PC glazing resulted in a 60kg weight saving.

It is unlikely that Renault chose PC for the rear quarterlights and screen on the limited edition road-going version of its high performance Megane F1 Team R26 car to reduce emissions, but the weight saving it achieved – 5.7kg per car – shows what can be realised through the use of polymers.



Autodesk to acquire Moldflow

Labels:

Part design will meet molding simulation in a deal that combines CAD supplier Autodesk (San Rafael, CA) with mold-filling simulation provider Moldflow (Framingham, MA). Autodesk will pay $22/share for Moldflow in a deal valued at $297 million. Paul Davis, director of industry and product public relations for Autodesk, told MPW that Moldflow was targeted as part of his company’s ongoing search for partners.

Autodesk views the Moldflow platform as a means to augment its Digital Prototyping line, while Moldflow said in a release that the combined analysis and simulation programs will support part design, tool design, and part production.

Davis stressed that the addition is fully complementary without redundancy in lines, as Autodesk had no products specifically related to plastics or mold filling. Davis points out that Autodesk’s AutoCAD is not a 3D simulation or analysis tool the way that Inventor is, but Moldflow products can use Inventor models today.

In some instances, the platforms are able to communicate, with plans to boost that exchange potential going forward. Peter Rucinski, director of marketing communications at Moldflow, says that currently Moldflow Plastics Adviser links to Autodesk Inventor via a button.

Moldflow’s R&D, sales, service, and marketing teams will remain largely intact, according to Davis, with decisions regarding branding and the Moldflow name postponed until the deal closes. Moldflow has 285 employees and reported FY07 revenues of $55.9 million.

Hosokawa Alpine dedicates new production facility



Employees at Hosokawa helped finance, and will profit from, a new solar collection unit.

Blown-film equipment maker Hosokawa Alpine (Augsburg, Germany) opened a new 7100m2 production expansion at its headquarters, representing an investment of more than €11 million. The new building replaces an older, smaller structure from the last century. The new building will be used to assemble blown-film lines, winders, MDO film-stretching units, mills, and recycling units.

Also, 100 of the 540 Hosokawa Alpine employees contributed more than €400,000 to build a photovoltaic installation on the roof of the new building. These workers then formed their own company to sell the yearly energy output of 250,000 kW/hr from the 2700m2 unit to the city’s electricity works.

Total investment in the solar collection array is €1.3 million and was co-financed by several German banks. Profits from the energy generated are distributed to the workers according to their share ownership.






China pursues coal as path to plastics

Labels:

Coal’s appeal to China is twofold: it could help bring the country’s industrial awakening westward and promote national self sufficiency in basic chemicals and some plastics.

Behind the U.S. (27%) and Russia (17%), China has the third-largest global coal reserves (13%), with much of the fossil fuel already used to feed the country’s exploding energy needs. Increasingly however, China is exploring liquefaction of the hydrocarbon for the creation of chemicals. In late 2007, the country completed its first coal-to-liquids (CTL) plant in the Inner Mongolia Autonomous Region. Built by Shenhua Coal Liquefaction Corp., that facility will have an initial capacity of 20,000 barrels per day, with the tentative goal being to boost capacity to 100,000 bbl/day by 2010.

According to the U.S. government’s Energy Information Administration’s (EIA) “2007 International Energy Outlook,” China’s Shenhua and Ningxia Industry Groups are undertaking feasibility studies for two 80,000 bbl/day coal-to-liquids plants to be sited in the Ningxia Autonomous Region and the Shaanxi Province.

The EIA reports that government and industry groups in China have proposed daily CTL capacity of 1 million barrels by 2020. Last summer, ShengdaTech Inc. (Taian City, China) added 40,000 tonnes of annual nano-precipitated calcium carbonate (NPCC) capacity at its factory in Xianyang City, Shanxi Province. The NPPCs are used in tires, paints, polyvinyl chloride (PVC), and other products.

To support these efforts, the Chinese government has shifted its tariff structure for coal exports. In the past, China offered an 8% export tax rebate to encourage exports, but it now imposes a 5% export tax on coking coal, with an additional export tax on steam coal under consideration. The country has also lowered its 2007 export cap to 46 million tons, which is roughly half of its coal exports in 2003.



ShengdaTech invested roughly $10 million to add two new lines, each with 20,000 tonnes of annual capacity, to its factory at Shengda Industrial Park.

Black gold

At the company’s annual Global Petrochemical Conference, Paul Pang, managing director of Chemical Market Associates Inc.’s (CMAI; Houston) Shanghai branch, outlined China’s CTL efforts as they relate to chemicals and plastics. Pang said that the country’s latest five-year plan calls for development of heavy industry in the west, including chemicals and metals. As China sill imports 20 million lb of basic chemicals annually, Pang said it is working toward adding large-scale coal-fed petrochemical sites, with 24 million lb of basic chemical capacity added by 2011.

The primary plastic derived from these efforts has been polyvinyl chloride (PVC), with coal-derived capacity jumping from 2 million tons in 2002 to 7 million by 2007. By 2012, Pang says coal-based methanol and PVC throughput will double from current levels, with more than 90% of China’s PVC being derived from coal. The coal will also be used to produce propylene and ethylene, monomer feedstocks for polypropylene and polyethylene among other resins, with the state backing several large-scale projects. Over the next three to four years, the Middle East will add huge amounts of resin capacity, with much of the production intended for China, but in PVC, at least, Pang says China’s CTL path is economically competitive, with the end product roughly $100 cheaper than PVC derived from petroleum.

Pang’s CMAI associate, Steve Zinger, reported at the same conference that there are 12 coal-to-polyolefins projects being looked at in China, calling the effort a “game changer in olefins.” Zinger added, “There’s a lot of internal pressure to get self sufficient in other basic commodities, and certainly ethylene is no exception,” pointing out that as in steel, China’s government will wholeheartedly encourage domestic development of basic industries.